Assembly Instruction

Made in China - r06 Page 3 of 3

TIVOLI BUFFET

drawer front

panel

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

unit is finished with a protective clear lacquer.

5 A) Fit dowels of drawer crossbar into corresponding

holes of drawer front and back panels as shown. Secure

drawer crossbar to front panel with 1 large screw, using

a screwdriver.

B) Secure drawer crossbar to drawer back panel with 1

large screw, using a screwdriver.

C) Slide drawer bottom panel into corresponding

grooves of drawer front and back panels.

6 Fit dowels of assembled unit into corresponding holes

of drawer left and right side panels as shown. Secure

each side with 4 large screws, using a screwdriver.

7 A) Fit drawer glides of drawer assembly into corre-

sponding drawer glides of assembled unit as shown.

B) Attach 2 pulls to drawer front with 2 medium screws

per pull as shown, using a screwdriver.

drawer back

panel

drawer

crossbar

drawer left

panel

drawer right

panel

8 A) Insert 4 shelf pins at desired shelf heights as shown.

B) Place adjustable shelf into assembled unit as shown.

Make sure shelf is fully supported by shelf pins.

C) Attach plate to left door with 2 medium screws and

handle to right door with 4 medium screws as shown.

Assembly is now complete.

adjustable

shelf

drawer bottom

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com