Assembly Instruction

Made in China - r06 Page 2 of 3
TIVOLI BUFFET
NOTE: Do not over
tighten the screws
1 With the assistance of another adult, fit dowels of
bottom panel into corresponding holes of left and right
side panels. Secure bottom panel to side panels with 4
phillips bolts, 4 spring washers and 4 flat washers
using a phillips screw driver. Do not over tighten the
bolts.
2 With the assistance of another adult, carefully place front
frame onto a clean, padded surface. Fit dowels of
assembled unit into corresponding holes of front frame as
shown. Secure front panel with 8 phillips bolts, 8 spring
washers and 8 flat washers.
3 A) With the assistance of another adult, carefully
position unit upright. Fit dowels of assembled unit into
corresponding holes of top panel. Secure top panel to
side panels with 4 allen bolts, 4 spring washers and 4
flat washers, using an allen wrench.
B) Secure top panel to front frame with 2 phillips bolts,
2 spring washers and 2 flat washers, using a screw-
driver.
NOTE: Do not over
tighten the bolts
4 Attach back panel to assembled unit with 18 small
screws, using a screwdriver.
left side panel
right side panel
bottom panel
top panel
back panel
A
B
B
A
front
frame
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com