Assembly Instruction

3-WAY LAUNDRY SORTER
Made in China - r06 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
6 A) Position assembled unit as shown. Insert 2 barrel
nuts into middle crossbar as shown.
B) Attached middle crossbar to inner left and right side
frames with 2 bolts and 4 washers per side as shown. At
this point, fully secure all bolts, using a allen wrench. Do
not over tighten the bolts.
C) Attach 4 wheels to assembled unit by turning each
wheel clockwise.
5 A) Insert 2 barrel nuts into each rod crossbar.
B) Attach 2 rod crossbars to inner left and right side
frames with 4 bolts and 8 washers per side as shown.
Loosely secure bolts.
8 A) Attach extended glides to inner left and right side
frames with 2 small screws per side as shown. Secure,
but do not over tighten, screws using a screwdriver.
B) Cover all exposed bolts with 28 bolt covers.
Assembly is now complete.
7 A) Slide 2 rods into each laundry bag as shown.
B) Place laundry bag assemblies onto rod crossbars of
assembled unit as shown.
rod crossbar
inner right
side frame
inner left
side frame
middle
crossbar
A
B
rod
laundry bag
A
B
C
wheel
A
B