Assembly Instruction

Made in China - r07 Page 2 of 2
SURF FLIP TOP TABLE
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 Turn knob counter-clockwise and lift to release
pre-assembled top and bottom hinges of tabletop. With
assistance of another adult, attach bottom hinge to leg
assembly with 4 bolts as shown. Secure, but do not over
tighten, bolts with an allen wrench.
3 To flip tabletop down, lift knob of top hinge and make
parallel with the tabletop. Carefully position tabletop flat
and fit knob into notch of bottom hinge. Turn knob
counter-clockwise to secure tabletop as shown. To flip
tabletop up, turn knob clockwise to release.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished
with a protective clear lacquer. It is recom-
mended to use coasters to protect surface from
heat and water.
tabletop
top
hinge
bottom
hinge
NOTE: Make sure another
adult holds the tabletop while
attaching the bottom hinge to
the leg assembly
knob