Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r07 Page 1 of 2

Thank you for purchasing the Surf Flip Top Table. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

SURF FLIP TOP TABLE

Missing hardware?

Please call 800.606.6387 for replacements.

allen wrench (included)

1 - top

leg

1 - tabletop

(top and bottom

hinge pre-assembled)

1 - bottom

leg

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

4 - bolts

1 A) With the assistance of another adult, fit notch of

top leg into corresponding notch of bottom leg as

shown. Make sure top and bottom legs are securely

engaged.

top leg

bottom leg

PAGE 1
SURF FLIP TOP TABLE HARDWARE 4 - bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Surf Flip Top Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
SURF FLIP TOP TABLE knob NOTE: Make sure another adult holds the tabletop while attaching the bottom hinge to the leg assembly top hinge tabletop bottom hinge 2 Turn knob counter-clockwise and lift to release pre-assembled top and bottom hinges of tabletop. With assistance of another adult, attach bottom hinge to leg assembly with 4 bolts as shown. Secure, but do not over tighten, bolts with an allen wrench. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.