Assembly Instruction

SUMMIT BUFFET
Made in China - r03 Page 2 of 4
1 Remove 2 drawer assemblies from buffet top
assembly as shown. Set drawer assemblies aside
until further instructions.
2 A) Insert 2 cam screws into buffet top assembly as shown.
Secure cam screws with a phillips head screwdriver.
B) Insert 2 cams into partition as shown. Make sure arrows on
each cam points toward nearest edge with holes.
C) Fit pre-assembled dowels of partition into corresponding
holes of buffet top assembly as shown. With a screwdriver,
turn cams clockwise until it securely engages each cam screw.
buffet top
assembly
partition
bottom
panel
A
left side
panel
right side
panel
B
NOTE: Make sure
arrows on each cam
points toward
nearest edge with
holes.
B
A
A
B
B
A
Customer Service 800.967.6696 | www.crateandbarrel.com
3 Fit dowels of partition into corresponding holes of
bottom panel as shown. Secure bottom panel with 2
large screws as shown, using a screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
4 A) Insert 2 cam screws into left/right side panels as
shown.
B) Insert 4 cams into bottom panel as shown. Secure all
cams.