Assembly Instruction

SUMMIT BUFFET
Made in China - r03 Page 3 of 4
6 Attach center support to bottom of assembled
unit as shown with 2 small bolts, 2 spring washers,
and 2 flat washers.
7 Attach 2 back panels to assembled unit as shown
with 26 small screws. Secure screws with a
screwdriver.
center
support
adjustable
shelf
A
A
B
5 Secure tabletop assembly with 4 large bolts, 4
spring washers, and 4 flat washers per side panel.
Secure bolts with a screwdriver.
Customer Service 800.967.6696 | www.crateandbarrel.com
8 A) Insert 8 shelf pins at desired shelf heights as
shown.
B) Place 2 adjustable shelves into assembled unit as
shown. Make sure each shelf is supported by shelf
pins.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
8 A) Attach 1 pull to each drawer with 2 pull bolts as
shown. Secure bolts with a screwdriver.
B) Fit drawer glides of 2 drawer assemblies into
corresponding drawer glides of assembled unit as
shown.
left side
panel
right side
panel
C) Fit dowels of assembled unit into corresponding holes of left/right side panels.
Secure all cams on bottom panel.
D) Secure tabletop assembly with 4 large bolts, 4 spring washers, and 4 flat
washers per side panel.