Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Summit Buffet and Hutch

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r03 Page 1 of 4

Thank you for purchasing the Summit Buffet. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

SUMMIT BUFFET

26 - small

screws

2 - large

screws

2 - small

bolts

8 - large

bolts

10 - spring

washers

10 - flat

washers

2 - pulls

8 - shelf

pins

6 - cam

screws

6 - cams

Missing hardware? Please call

800.606.6387 for replacements.

4 - pull

bolts

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - buffet top assembly

(with pre-assembled drawers)

1 - bottom

panel

2 - side panels

(1 left, 1 right)

2 - adjustable

shelves

2 - doors

(1 left, 1 right)

1 - partition

1 - center

support

2 - back

panels

Summary of content (9 pages)

PAGE 1
SUMMIT BUFFET HARDWARE Thank you for purchasing the Summit Buffet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
SUMMIT BUFFET NOTE: Make sure arrows on each cam points toward nearest edge with holes. buffet top assembly A B A B partition 1 Remove 2 drawer assemblies from buffet top assembly as shown. Set drawer assemblies aside until further instructions. 2 A) Insert 2 cam screws into buffet top assembly as shown. Secure cam screws with a phillips head screwdriver. B) Insert 2 cams into partition as shown. Make sure arrows on each cam points toward nearest edge with holes.
PAGE 3
SUMMIT BUFFET left side panel center support right side panel 5 Secure tabletop assembly with 4 large bolts, 4 spring washers, and 4 flat washers per side panel. Secure bolts with a screwdriver. 6 Attach center support to bottom of assembled unit as shown with 2 small bolts, 2 spring washers, and 2 flat washers. A A B adjustable shelf 7 Attach 2 back panels to assembled unit as shown with 26 small screws. Secure screws with a screwdriver.
PAGE 4
SUMMIT BUFFET LEVERS LOCATED BEHIND DOOR FRAMES 9 A) Attach 1 pull to each drawer with 2 pull bolts as shown. Secure bolts with a screwdriver. B) Fit drawer glides of 2 drawer assemblies into corresponding drawer glides of assembled unit as shown. 10 With the assistance of another adult, carefully place unit upright. Insert bottom edge of right door into bottom back groove of unit as shown.
PAGE 5
SUMMIT HUTCH Missing hardware? Please call 800.606.6387 for replacements. ASSEMBLY HARDWARE 20 - small screws 8 - shelf pins 4 - large screws 4 - cam screws 4 - bolts 4 - cams 4 - flat washers 4 - spring washers 2 - connecting brackets WALL MOUNTING HARDWARE Thank you for purchasing the Summit Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 6
SUMMIT HUTCH Make sure arrows on each cam point towards nearest edge with holes A bottom panel right side panel B left/right side panel left side panel 1 A) Insert 4 cams into bottom panel as shown. Make sure arrows on each cam point towards nearest edge with holes. B) Insert 2 cam screws into left/right side panels as shown. Secure cam screws with a phillips head screwdriver. bottom panel 2 Fit pre-attached dowels of bottom panel into corresponding holes of left/right side panels as shown.
PAGE 7
SUMMIT HUTCH 5 A) Insert 8 shelf pins at desired shelf heights as shown. B) Place adjustable shelves into assembled unit as shown. Make sure each shelf is securely supported by shelf pins. A A B adjustable shelves grooves on top panel 6 Fit the bottom rollers of the right door into back groove. Depress levers located at the top of the door, tilt the door into the groove in the top panel. Release the levers to secure door. Repeat steps for left door, fitting it into the front groove.
PAGE 8
SUMMIT HUTCH hutch buffet (sold separately) 7 With the assistance of another adult, carefully place hutch onto buffet as shown. Attach 2 connecting brackets to back of hutch and buffet (sold separately) with 2 large screws per bracket as shown. Secure screws with a screwdriver. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
PAGE 9
SUMMIT HUTCH Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. C plastic anchor F wall strap wall bracket wall bracket large A) Attach wall bracket to top of bookcase using 2 medium screws as shown. B) Determine the final location of bookcase.