Assembly Instruction

STUDIO COMPACT OFFICE
Made in China - r06 Page 4 of 5
9 Fit dowels of assembled unit into corresponding
holes of top panel as shown.. Secure top panel with 6
small bolts, using a screwdriver.
10 Attach 2 hinges to left and right doors with 3
screws per hinge as shown. Secure screws with a
screwdriver.
left and right
doors
B
hinge
A
top
panel
B
A
Customer Service 800.967.6696 | www.crateandbarrel.com
11 A) Attach hinges of each door onto assembled unit with 6
screws per hinge as shown.
B) Attach pulls to left and right doors with 2 screws per pull
as shown. Secure screws with a screwdriver.
12 A) Insert 4 barrel nuts into drawer front as shown.
With a flathead screwdriver, turn nut so the threaded
holes are aligned with holes in panel edge as shown.
B) Insert 4 drawer barrel nuts into left and right drawer
sides as shown.
13 A) Attach right drawer side to drawer front and back
with 4 large bolts as shown. Secure bolts with a
screwdriver.
B) Slide drawer bottom into grooves of drawer assembly
as shown.
C) Attach left drawer side to drawer assembly with 4
large bolts as shown.
drawer
front
drawer
back
drawer
bottom
left
drawer
side
right
drawer
side
A
B
C
NOTE: Make sure
threaded holes of
each barrel nut is
aligned with holes
in panel edge.
B
A
drawer
front
left and right
drawer sides