Assembly Instruction

STUDIO COMPACT OFFICE
Made in China - r06 Page 3 of 5
5 Slide back panel thru grooves of left side panel of
assembled unit as shown.
NOTE: Groove on
bottom panel
assembly indicates
the back.
bottom panel
assembly
left side panel
assembly
back
panel
right side
panel
9 Fit dowels of assembled unit into corresponding
holes of top panel as shown.. Secure top panel with 6
small bolts, using a screwdriver.
5 Fit dowels of left side panel assembly into
corresponding holes of bottom panel assembly as
shown. With a screwdriver, secure assembly with 4
large bolts as shown.
right side
panel
8 Attach 4 legs to bottom panel with 2 allen bolts, 2
spring washers, and 2 flat washers per leg as shown.
Secure bolts with an allen wrench.
leg
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com
6 A) Insert 1 allen bolt into barrel nut of partition. Secure
bolt with an allen wrench.
B) Fit dowels of right side panel into corresponding holes of
assembled unit. Insert 2 allen bolts into barrel nuts of left
side panel.
6 Fit dowels of right side panel into corresponding
holes of assembly unit as shown. With a screwdriver,
secure assembly with 2 large bolts as shown.
top
panel