Assembly Instruction

STUDIO COMPACT OFFICE
Made in China - r06 Page 2 of 5
1 Attach 4 legs to bottom panel with 2 allen bolts, 2
spring washers, and 2 flat washers per leg as shown.
Secure bolts with an allen wrench.
1 A) Insert 4 cams and 4 wood dowels into fixed shelf as
shown. Make sure arrows on each cam points towards
nearest edge with holes.
B) Insert 2 cam screws, 3 barrel nuts, and 2 wood dowels
into partition as shown. Secure cam screws with a phillips
head screwdriver. With a screwdriver, turn barrel nut so the
threaded holes are aligned with holes in panel edge as
shown.
bottom
panel
leg
fixed shelf
B
partition
A
NOTE: Make sure
arrows on each cam
points towards nearest
edge with holes.
right side
panel
left side
panel
partition
fixed
shelf
4 Fit dowels of assembled unit into corresponding
holes of bottom panel. Insert 4 allen bolts into barrel
nuts of assembled unit, using an allen wrench.
bottom
panel
left side
panel
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com
2 A) Insert 5 wood dowels and 2 barrel nuts into right side
panel as shown.
B)Insert 2 barrel nuts, 5 wood dowels and 2 cam screws into
left side panels as shown.
3 Fit dowels of fixed shelf into left side panel and
partition as shown. With a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
NOTE: Make sure
threaded holes of
each barrel nut is
aligned with holes
in panel edge.