Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Studio Compact Office

HARDWARE

TOOLS REQUIRED

COMPONENTS

4 - legs

Made in China - r06 Page 1 of 5

Thank you for purchasing the Studio Compact Office.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

STUDIO COMPACT OFFICE

Missing hardware? Please call

800.606.6387 for replacements.

16 - wood

dowels

1- bottom

panel

2 - side panels

(1 left, 1 right)

1 - partition 1 - fixed

shelf

1 - back

panel

1 - top

panel

1 - tray

1 - drawer

back

2 - drawer sides

(1 left, 1 right)

1 - drawer

bottom

2 - adjustable

shelves

2 - doors

(1 left, 1 right)

1 - drawer

front

4 - cam

screws

4 - cams 15 - allen

bolts

8 - large

bolts

6 - small

bolts

44 - screws 8 - flat

washers

8 - spring

washers

11 - barrel

nuts

4 - file crossbars

(2 legal, 2 letter)

4 - hinges 2 - pulls 8 - shelf

pins

8 - drawer

barrel nuts

phillips head screwdriver

flat head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

allen wrench

(included)

Summary of content (5 pages)

PAGE 1
STUDIO COMPACT OFFICE Missing hardware? Please call 800.606.6387 for replacements. HARDWARE 16 - wood 4 - cam dowels screws 6 - small bolts Thank you for purchasing the Studio Compact Office. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
STUDIO COMPACT OFFICE A NOTE: Make sure arrows on each cam points towards nearest edge with holes. fixed shelf A right side panel NOTE: Make sure threaded holes of each barrel nut is aligned with holes in panel edge. B partition B 1 A) Insert 4 cams and 4 wood dowels into fixed shelf as shown. Make sure arrows on each cam points towards nearest edge with holes. B) Insert 2 cam screws, 3 barrel nuts, and 2 wood dowels into partition as shown. Secure cam screws with a phillips head screwdriver.
PAGE 3
STUDIO COMPACT OFFICE right side panel back panel A B 5 Slide back panel thru grooves of left side panel of assembled unit as shown. 6 A) Insert 1 allen bolt into barrel nut of partition. Secure bolt with an allen wrench. B) Fit dowels of right side panel into corresponding holes of assembled unit. Insert 2 allen bolts into barrel nuts of left side panel. top panel leg 8 Attach 4 legs to bottom panel with 2 allen bolts, 2 spring washers, and 2 flat washers per leg as shown.
PAGE 4
STUDIO COMPACT OFFICE B A left and right doors A hinge B 10 Attach 2 hinges to left and right doors with 3 screws per hinge as shown. Secure screws with a screwdriver. A 11 A) Attach hinges of each door onto assembled unit with 6 screws per hinge as shown. B) Attach pulls to left and right doors with 2 screws per pull as shown. Secure screws with a screwdriver.
PAGE 5
STUDIO COMPACT OFFICE ORIENTATION FOR LETTER SIZE HANGING FOLDERS A A B B ORIENTATION FOR LEGAL SIZE HANGING FOLDERS 14 Depending on the desired hanging file size (legal or letter), insert 2 file crossbars into corresponding slots of drawer assembly as shown. 15 A) Insert 1 screw into each hinge of assembled unit as shown. Secure screw with a screwdriver. B) Fit glides of drawer assembly into corresponding glides of assembled unit as shown.