Assembly Instruction

STORAGE LOCKER WITH CASTERS
Made in Taiwan - r05 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
6 A) Attach 1 handle to front of door with 2
lock washers and 2 handle bolts as shown.
Secure, but do not over tighten, bolts using a
flat head screwdriver.
CLEANING AND CARE
Clean surfaces with a dry soft cloth. Do not use abrasive cleaners.
handle
A
B
7 A) With 1 flat washer, fit peg of door assembly into
corresponding hole of bottom panel as shown.
B) Secure door assembly to top panel by fitting pin hinge into
corresponding holes of door assembly as shown.
C) Fit pin hinge into notch of door assembly as shown to secure.
Assembly is now complete.
ASSEMBLED
DOOR FRONT
C
D
B) Fit peg of handle into corre-
sponding hole of lock as shown.
C) Secure lock to handle with 1 lock
screw as shown.
D) Fit key into handle and ensure
key, handle and lock work properly.
ASSEMBLED
DOOR BACK
handle
handle
lock
washer
handle
bolt
lock
peg
lock screw
key
A
B
C
peg
flat
washer
pin
hinge
notch
pin
hinge
A
B
C