Assembly Instruction

top panel
B
NOTE: Do not over
tighten the bolts
NOTE: Do not over
tighten the screw
corner
plate
wheel
wheel
locking
wheel
locking
wheel
A
B
Made in Taiwan - r05
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
STORAGE LOCKER WITH CASTERS
Page 2 of 3
2 A) Secure top frame to assembly with 4
small bolts as shown. Secure, but do not
over tighten, the bolts using an allen wrench.
B) Fit bottom panel into assembly as shown.
3 A) Secure bottom panel to left/right side panels and back
panel with 4 corner plates and 2 large bolts per plate as shown,
using an allen wrench.
B) Attach 4 wheels to corner plates by turning each wheel clock-
wise to secure. Make sure locking wheels are at the front of the
assembly as shown.
C) Secure bottom panel with 1 screw as shown, using a phillips
head screwdriver. Do not over tighten the screws.
5 A) Fit 4 shelf pins into corresponding slots of
assembled unit at desired shelf height.
B) Fit 1 shelf into assembled unit as shown. Make sure
shelf is securely supported by each shelf pin.
4 With the assistance of another adult, position assembled
unit upright. Fit top panel into corresponding grooves of
top frame as shown. Secure top panel to top frame with 1
screw, using a phillips head screwdriver.
shelf
A
B
A
B
A
B
C
NOTE: Make sure hole
of bottom panel is
positioned facing up
bottom
panel