Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Storage Locker with Casters

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Taiwan - r05 Page 1 of 3

Thank you for purchasing the Storage Locker with

Casters. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

STORAGE LOCKER WITH CASTERS

Missing hardware?

Please call 800.606.6387 for replacements.

2 - side panels

(1 left, 1 right)

1 - lock

1 - back panel

1 - door

2 - locking

wheels

2 - wheels

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

ASSEMBLY

top frame

4 - small

bolts

8 - large

bolts

4 - shelf

pins

2 - screws 2 - handle

bolts

phillips head screwdriver

(not included)

allen wrench (included)

left side

panel

1 With the assistance of another adult, place left and

right side panels, back panel and top frame onto a

clean, padded surface. Fit left side panel into top panel,

right side panel and back frame as shown. Make sure

panels securely engage each other.

1 - top panel

1 - top frame

1 - shelf

1 - bottom panel

right side

panel

flat head screwdriver

(not included)

1 - pin

hinge

2 - lock

washers

1 - flat

washer

1 - lock

screw

1 - handle

2 - keys

4 - corner

plates

hex wrench (included)

NOTE: Make sure hole

of top frame is positioned

as shown

Summary of content (3 pages)

PAGE 1
STORAGE LOCKER WITH CASTERS Missing hardware? Please call 800.606.6387 for replacements. HARDWARE 4 - small bolts 8 - large bolts 2 - screws 2 - handle bolts 1 - lock screw 4 - shelf pins 1 - lock 1 - pin hinge 2 - lock washers 1 - flat washer TOOLS REQUIRED allen wrench (included) Thank you for purchasing the Storage Locker with Casters. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
STORAGE LOCKER WITH CASTERS NOTE: Do not over tighten the bolts A B NOTE: Do not over tighten the screw corner plate A B A B B locking wheel locking wheel wheel C bottom panel NOTE: Make sure hole of bottom panel is positioned facing up 2 A) Secure top frame to assembly with 4 small bolts as shown. Secure, but do not over tighten, the bolts using an allen wrench. B) Fit bottom panel into assembly as shown.
PAGE 3
STORAGE LOCKER WITH CASTERS lock washer peg handle bolt A C lock B handle handle lock screw 6 A) Attach 1 handle to front of door with 2 lock washers and 2 handle bolts as shown. Secure, but do not over tighten, bolts using a flat head screwdriver. B) Fit peg of handle into corre- C) Secure lock to handle with 1 lock sponding hole of lock as shown. screw as shown. key D ASSEMBLED DOOR BACK ASSEMBLED DOOR FRONT handle D) Fit key into handle and ensure key, handle and lock work properly.