Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Springdale Yellow Tall Cabinet

Customer Service 800-967-6696 | http://www.crateandbarrel.com

SPRINGDALE TALL CABINET

Made in China R04

Page 1 of 4

Thank you for purchasing the Springdale Tall Cabinet.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

10 - wood

dowels

14 - cams

14 - cam

screws

33 - wood

screws

8 - shelf pins

1 - knobs

1 - machine

screw

1 - large

screw

Phillips head screwdriver

1 - medium

screw

1 - wall

anchor

1 - wall

strap

2 - metal

brackets

1- left side

panel

1 - right

side panel

1 - door

panel

1 - crossbar

2 - adjustable

shelves

1 - top

panel

1 - fixed

shelf

1 - bottom

panel

1 - back

panel

Summary of content (4 pages)

PAGE 1
SPRINGDALE TALL CABINET HARDWARE Thank you for purchasing the Springdale Tall Cabinet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
SPRINGDALE TALL CABINET Fixed Shelf Bottom Panel Crossbar B A A x6 x10 1 B A) Insert 10 cams into 1 bottom panel, 1 fixed shelf, and 1 crossbar as shown. Make sure the arrows on each cam point towards the nearest edge with holes. B) Insert 6 wood dowels into bottom panel, fixed shelf, and crossbar. 2 Insert 10 cam screws into right and left panel, as illustrated above. Secure each screw with a phillips head screwdriver.
PAGE 3
SPRINGDALE TALL CABINET 5 A) Fit top panel to assembled unit, by aligning cam screws and wood dowels with corresponding holes. B) Secure unit by turning each cam clockwise with phillips head screwdriver. 6 A) Attach back panel with 24 wood screws along perimeter and center (use pilot holes as guides). Secure with a phillips head screwdriver. B B B A 7 x9 A A) Insert 8 shelf pins into side panels at desired level. B) Place 2 adjustable shelves into unit, make sure grooves are towards the back.
PAGE 4
SPRINGDALE TALL CABINET CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer. 9 Place unit in its final location. If the floor is uneven or the door doesn't appear square in the case frame, adjust levellers on the underside of the legs up or down to compensate. Assembly is now complete.