Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Springdale White Low Dbldr Cabnt

Customer Service 800-967-6696 | http://www.crateandbarrel.com

SPRINGDALE LOW DOUBLE DOOR CABINET

Made in China R03

Page 1 of 4

Thank you for purchasing the Springdale Low Double

Door Cabinet. This page

lists all the contents included

in the box. Please take the time

to identify the hardware

as well as the individual components

to this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

10 - wood

dowels

7 - cams 7 - cam

screws

24 - wood

screws

1 - shelf pin 2 - knobs

2 - machine

screws

4 - screws

Phillips head screwdriver

1 - top panel

1 - fixed shelf

1 - bottom panel

1 - front frame with attached

left and right panels

1 - support leg

Summary of content (4 pages)

PAGE 1
SPRINGDALE LOW DOUBLE DOOR CABINET HARDWARE Thank you for purchasing the Springdale Low Double Door Cabinet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
SPRINGDALE LOW DOUBLE DOOR CABINET A A B B A 1 A) Insert 3 cams and 2 wood dowels into bottom panel, as illustrated above. Make sure the arrows on each cam points towards the nearest edge with holes. B) Attach support panel by aligning wood dowels on bottom panel. Secure support panel with 2 screws. Fully tighten each screw with a phillips head screwdriver. Cam in unlocked position 2 With the assistance of another adult, gently lay front frame on padded surface.
PAGE 3
SPRINGDALE LOW DOUBLE DOOR CABINET 5 Fit top panel onto assembly. Secure by turning each cam on the side panels clockwise with a phillips head screwdriver. 6 With assistance of another adult, carefully slide fixed shelf through grooves, as illustrated above. Make sure front of fixed shelf is supported by shelf pin. x24 7 Place back panel onto assembled unit as shown. Attach with 24 wood screws and secure with a phillips head screwdriver. 8 With assistance of another adult, stand unit upright.
PAGE 4
SPRINGDALE LOW DOUBLE DOOR CABINET CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 9 Place unit in its final location. If the floor is uneven or the door doesn't appear square in the case frame, adjust levellers on the underside of the legs up or down to compensate. Assembly is now complete. Made in China R03 Page 4 of 4 Customer Service 800-967-6696 | http://www.