Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
SPRINGDALE SPIRITS CABINET
Made in China 2004
Page 4 of 4
9 Safety Mounting Instructions
For added safety and stability, it is recommended
that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever
possible.
A) Attach bracket to top center of cabinet using 1
bracket screw.
B) Determine the final location of cabinet. Mark
position on the wall, approximately 2" below the
bracket mounted to the back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller
in width than the anchor. Gently tap the wall anchor
until the flange of the anchor is flush with the wall.
D) Attach the other bracket to the wall by inserting 1
pan head screw through the bracket and into the
wall anchor in the wall.
E) Place the furniture so the bracket on the back
edge is in line with the bracket on the wall.
F) Lace one end of the wall strap through both
brackets, bringing the ends together.
G) Make sure the strap is secure.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is finished with
a protective clear lacquer.