Assembly Instruction

COMPONENTS
1 Position table upright as
shown.
2 A) Locate extension leaves on each side of
table. Carefully lift 1 extension leaf 90º as
shown. NOTE: Make sure to grab the leaf
near the bottom with both hands.
B) Locate locking mechanism on leg frame and
release pin. Pull out leg frame 90º as shown.
Fit pin into corresponding hole underneath leaf
and lock into place.
3 If desired, repeat steps for remaining
leaf.
Leaf extension is now complete.
NOTE: When lowering the leaves,
make sure to grab near the edges
with both hands.
LEAF EXTENSION ASSEMBLY
1
2
Made in China - r05 Page 1 of 1
Thank you for purchasing the Span Gateleg Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you
unpack, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely lift and move this table.
1 person can safely extend the leaves on this product.
SPAN GATELEG TABLE
1 - table
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
B
90º
gateleg
leaf
leg frame
90º
NOTE: Make sure pin
is securely set into leaf
and locked into place
NOTE: Be careful
not to pinch your
fingers when lifting
and lowering the
tabletops
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Do not use furniture wax or
polish as the wood is finished with a protective clear
lacquer. It is recommended to use coasters to protect
against heat and water.
3
leg frame
button (to release pin)
pin (locking mechanism)
base of pin (to lock pin)