Assembly Instruction

Made in China r03 Page 3 of 3

SOMERSET

KITCHEN CART

6 A) Attach right side drawer panel onto drawer

front panel as shown. Secure with 2 long screws

using a Phillips head screwdriver. Make sure the

wheel on each drawer slide is towards the back.

Repeat step for left side drawer panel.

B) Slide drawer bottom panel into grooves of drawer

assembly.

7 A) Attach drawer back panel onto assembly with

2 long screws per side panel. Secure with a Phillips

head screwdriver.

B) Attach drawer pull onto drawer assembly as

shown with 1 drawer pull screw as shown. Secure

with a Phillips head screwdriver.

8 A) Insert assembled drawer into assembled unit, by

aligning corresponding drawer glides.

B) Insert 4 shelf pins at desired shelf height.

C) Fit adjustable shelf into position. Secure with 1

short screw per shelf pin as shown.

Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

unit is finished with a protective clear lacquer.

Make sure the

wheel on drawer

slide is towards

the back.

Customer Service 800.967.6696 | www.crateandbarrel.com

5 A) With the assistance of another adult, carefully

place assembled unit upright. Fit 5 metal brackets

into slots located on back panel, right side panel,

and left side panel.

B) Place top panel onto assembled unit as shown.

Using a Phillips head screwdriver, secure top panel

with 1 extra short bolt per bracket as shown.