Assembly Instruction

SOLEIL 48” DINING TABLE
Made in China - r04 Page 2 of 2
2 With the assistance of another adult, carefully place
tabletop face down onto a clean, padded surface. Posi-
tion holes of leg frames over corresponding holes of
tabletop. Attach top and bottom leg frames to tabletop
with 8 long bolts and 8 washers. Secure bolts with an
allen wrench. NOTE: Tighten each bolt a few revolutions at a
time, applying equal pressure to all bolt joints. Repeat until all
bolts are tight. Do not over-tighten. Over-tightening may strip
bolts.
3 Secure top and bottom leg frames with 1 small
bolt as shown, using an allen wrench. With the
assistance of another adult, carefully position unit
upright.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Customer Service 800.967.6696 | www.crateandbarrel.com