Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04 Page 1 of 2

Thank you for purchasing the Soleil 48” Dining Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

SOLEIL 48” DINING TABLE

Missing hardware? Please call 800.606.6387

for replacements.

1 - small bolt 8 - large bolts

8 - washers

allen wrench (included)

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - tabletop

1 - bottom leg

frame

1 - top leg

frame

bottom leg

frame

top leg

frame

1 Fit top leg frame into notch of bottom leg frame as

shown.

PAGE 1
SOLEIL 48” DINING TABLE HARDWARE 1 - small bolt 8 - large bolts 8 - washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Soleil 48” Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
SOLEIL 48” DINING TABLE 2 With the assistance of another adult, carefully place tabletop face down onto a clean, padded surface. Position holes of leg frames over corresponding holes of tabletop. Attach top and bottom leg frames to tabletop with 8 long bolts and 8 washers. Secure bolts with an allen wrench. NOTE: Tighten each bolt a few revolutions at a time, applying equal pressure to all bolt joints. Repeat until all bolts are tight. Do not over-tighten. Over-tightening may strip bolts.