Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
1 Attach 2 leg frames to bottom frame with 2 large bolts
per leg as shown, using an allen wrench. Do not over tighten
the bolts. Make sure each leg frame is flush on both sides
with table edge before securing bolts.
ASSEMBLY
2 On a clean, padded surface place tabletop upside down.
Attach tabletop to leg frames with 3 small bolts per leg as
shown, using an allen wrench. Make sure each leg frame is
flush on both sides with table edge before securing bolts.
Position unit upright. Assembly is now complete.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from heat and water.
CLEANING & CARE
NOTE: Make sure each
leg frame is flush on both
sides with table edge
before securing bolts
Made in China - r04 Page 1 of 1
Thank you for purchasing the Skye C Table. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
SKYE C TABLE
Missing hardware?
Please call 800.606.6387
for replacements.
6 - small bolts 4 - large bolts
allen wrench
(included)
1 - tabletop 1 - bottom
frame
2 - leg
frames
leg frame
tabletop
bottom
frame
NOTE: Do not over
tighten the bolts
leg frame
large bolts
small
bolts
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com