Assembly Instruction

RONAN 4 DRAWER CHEST

Made in Indonesia - r11 Page 3 of 4

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

7 Attach drawer left and right side panels to drawer

front with 2 large screws per side as shown, using a

screwdriver.

drawer

front

drawer left

side panel

back panel

6 Attach 2 back panels to assembled unit with 12

small screws per back panel as shown, using a screw-

driver. Do not over tighten the screws.

NOTE: Do not over

tighten the screws

back panel

8 Slide edge of drawer bottom with locking devices into

grooves of assembled drawer first as shown.

drawer bottom

drawer right

side panel

NOTE: Make sure drawer

stops on the inside of drawer

front are at the bottom

NOTE: Make sure

glide locking devices

on drawer bottom face

drawer front as shown

5 A) Fit wood dowels of bottom panel into correspond-

ing hole of back crossbar.

B) Fit wood dowels of top panel into corresponding holes

of left and right side panels. Secure all cams.

top

panel

back

crossbar

NOTE: Make sure

crossbar of top panel

faces front as shown