Assembly Instruction

Made in China - r03 Page 2 of 2
2 Attach seat mechanism to seat with 4 bolts, 4 spring
washers, and 4 flat washers as shown. Make sure
mechanism is positioned as shown. Secure, but do not
over tighten, bolts with an allen wrench.
ROLLING DESK CHAIR
FRONT
bolt
spring washer
flat washer
3 Fit bottom of gas lift into hole of base as shown.
gas
lift
seat
4 Fit top of gas lift into corresponding hole on the
bottom of the seat assembly as shown.
NOTE: Finalize assembly by sitting heavily on the chair
a few times. This will secure all the component
connections.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.