Assembly Instruction

ASSEMBLY

COMPONENTS

1 - tabletop

Made in Taiwan- r02 Page 1 of 2

Thank you for purchasing the Rectangular Kitchen

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

RECTANGULAR KITCHEN TABLE

HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

1 - leg frame

1 - allen wrench

(included)

2 - legs

1 With the assistance of another adult, place leg

frame upside down on a clean, padded surface.

Attach 2 legs to leg frame with 1 large bolt per

leg as shown. Loosely attach bolts using an allen

wrench.

2 - large

bolts

16 - small

bolts

leg

frame

leg

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
RECTANGULAR KITCHEN TABLE HARDWARE 16 - small bolts 2 - large bolts Missing hardware? Please call 800.606.6387 for replacements. COMPONENTS 1 - tabletop Thank you for purchasing the Rectangular Kitchen Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
RECTANGULAR KITCHEN TABLE 2 With the assistance of another adult, position tabletop as shown. Align holes in brackets of leg assembly with corresponding holes in tabletop. Loosely attach each bracket with 4 small bolts as shown, using an allen wrench. At this point, fully tighten large/small bolts with an allen wrench. Do not over tighten the bolts. leg assembly Assembly is now complete. bracket tabletop CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.