Assembly Instruction

QUBE 4-SECTION
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 Slide 2 back panels into corresponding grooves of
assembled unit as shown.
back
panel
back
panel
2 A) Insert 4 cams into 2 left and right shelves as
shown. Make sure arrows on each cam point toward
nearest edge with holes.
B) Insert 4 cams and 2 cam screws into left and right
side panels as shown.
C) Insert 4 cams and 4 cam screws into partition as
shown.
left and right
side panels
partition
right shelf
4 With the assitance of another adult, fit cam screws
of left side panel, partition and right side panel into
corresponding holes of shelves as shown. Using a
phillips head screwdriver, turn cams counter-clockwise
until each cam securely engages each cam screw.
left side
panel
partition
right side
panel
3 A) Attach 1 magnet to right shelf with 2 medium
screws as shown, using a phillips head screwdriver. Do
not over tighten the screws.
B) Attach 1 magnet to top panel with 2 medium screws
as shown, using a screwdriver.
NOTE: Make sure
magnet faces out
as shown
NOTE: Make sure arrows on each cam
point toward nearest edge with holes
left shelf
right shelf
top
panel
magnet
A
B
A
B
A
C