Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Qube 4-Section Storage Unit

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04 Page 1 of 4

Thank you for purchasing the Qube 4-Section. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

QUBE 4-SECTION

Missing hardware?

Please call 800.606.6387 for replacements.

2 - shelves

(1 left, 1 right)

12 - small

screws

1 - top panel

2 - side panels

(1 left, 1 right)

1 - partition

2 - back panels

2 - doors

1 - bottom panel

4 - feet

Customer Service 800.967.6696 | Latest instructions avaliable at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

top

panel

4 - medium

screws

8 - large

screws

2 - brackets

20 - cams 20 - cam

screws

phillips head screwdriver

NOTE: Do not over

tighten the cam screws

1 Insert 6 cam screws into top and bottom panels as

shown. Secure, but do not over tighten, cam screws using

a phillips head screwdriver.

bottom

panel

4 - door

hinges

2 - magnets

Summary of content (4 pages)

PAGE 1
QUBE 4-SECTION HARDWARE 20 - cams 20 - cam screws 12 - small 4 - medium 8 - large screws screws screws 2 - brackets 2 - magnets 4 - door hinges Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Qube 4-Section. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
QUBE 4-SECTION NOTE: Make sure arrows on each cam point toward nearest edge with holes A magnet A right shelf left shelf A right shelf left and right B side panels C partition top B panel 2 A) Insert 4 cams into 2 left and right shelves as shown. Make sure arrows on each cam point toward nearest edge with holes. B) Insert 4 cams and 2 cam screws into left and right side panels as shown. C) Insert 4 cams and 4 cam screws into partition as shown.
PAGE 3
QUBE 4-SECTION bracket A B door hinge foot door bottom panel 6 A) Attach 2 door hinges to door with 2 small screws per hinge as shown, using a screwdriver. B) Attach 1 bracket to door with 2 small screws as shown. Repeat for remaining door. 7 Attach 4 feet to bottom panel with 2 large screws per foot as shown, using a screwdriver. door front bottom panel B A door front 8 A) Fit pegs of door hinge into corresponding hole of assembled unit and bottom panel.
PAGE 4
QUBE 4-SECTION top panel 10 Fit cam screws of top panel into corresponding holes of assembled unit as shown. Secure all cams. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in China - r04 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.