Assembly Instruction

Made in China - r03
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
QUBE 1-SECTION
Page 3 of 3
8 Fit pegs of door hinge into corresponding hole of
bottom panel.
door
top panel
7 A) Attach 2 door hinges to door with 2 small screws
per hinge as shown, using a screwdriver.
B) Attach 1 bracket to door with 2 small screws as
shown.
door
door hinge
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the wood is finished with a protective clear lacquer.
bracket
A
B
6 Slide back panel into corresponding grooves of
assembled unit.
back
panel
NOTE: Make sure
magnet faces out
as shown
peg
9 Fit cam screws of top panel into corresponding
holes of assembled unit as shown. Secure all cams.
Assembly is now complete.