Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
Made in China R04 Page 2 of 2
QUARTZ
KEYBOARD PULLOUT
A) Fit keyboard tray into position and secure to drawer glides with 4 flat head bolts and 4
small hex nuts.
B) Secure bracket assembly from Step 1 to the desktop frame by fully tightening all allen
bolts and large hex nuts with the allen wrench and hex wrench.
C) Attach wrist support to keyboard shelf using 4 flat head bolts and 4 small hex nuts.
Secure each bolt using an allen wrench; secure each nut using a hex wrench.
Assembly is now complete.
2
A
C
Underside of
keyboard tray
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners.