Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
QUARTZ DESK
Made in China R04
Page 2 of 3
Attach both left and right side frames to top back
crossbar, top front crossbar, and bottom crossbar,
using 3 small screws at each end. Secure each screw
with the Allen wrench.
Fit 4 feet into the holes on the bottom of
the assembled unit.
1
2
3
Hook wire into the 2 holes located underneath the
top back crossbar as illustrated. Make sure to
insert wire hook through the lower hole only.
4
With the assistance of another adult, lay assembled
unit on its side. Insert connecting screw into bottom
crossbar. As illustrated, slide 1 washer onto screw
and secure with 1 wing nut.
x2
x6
Insert wire hook into lower hole only