Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
2 Secure the 2 leg assemblies together with 2 bolts
and 2 hex nuts. Secure each bolt with a phillips head
screwdriver, but do not over tighten.
QUANTUM BISTRO TABLE
Page 2 of 2
Made in Canada - r05
3 Place leg assembly into position over pre-drilled holes
in table top. Loosely insert 4 wood screws per leg.
After the base is in its final position, fully tighten all wood
screws with a phillips head screwdriver.
With the assistance of another adult, lift table upright.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
NOTE:
Do not over
tighten bolts