Assembly Instruction

Table Of Contents

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 Slip leg assembly B through leg assembly A as

shown.

Thank you for purchasing the Quantum Bistro

Table. This page lists all the contents included

in the box. Please take time to identify the

hardware as well as the individual components

of this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble

this product.

COMPONENTS

1 - table top

1 - leg assembly A

1 - leg assembly B

TOOLS REQUIRED

Phillips head screwdriver

QUANTUM BISTRO TABLE

Page 1 of 2

Made in Canada - r05

Missing hardware? Please call 800.606.6387 for

replacements.

16 - wood

screws

2 - hex nuts

2 - bolts

PAGE 1
QUANTUM BISTRO TABLE HARDWARE 16 - wood screws 2 - bolts 2 - hex nuts Thank you for purchasing the Quantum Bistro Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. Missing hardware? Please call 800.606.
PAGE 2
QUANTUM BISTRO TABLE NOTE: Do not over tighten bolts 2 Secure the 2 leg assemblies together with 2 bolts and 2 hex nuts. Secure each bolt with a phillips head screwdriver, but do not over tighten. 3 Place leg assembly into position over pre-drilled holes in table top. Loosely insert 4 wood screws per leg. After the base is in its final position, fully tighten all wood screws with a phillips head screwdriver. With the assistance of another adult, lift table upright. Assembly is now complete.