Assembly Instruction

PUZZLE ENTERTAINMENT CENTER
Made in China r10 Page 3 of 3
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish.
Customer Service 800.967.6696 | www.crateandbarrel.com
5 Carefully position unit upright as shown. Attach back
panel onto assembled unit with 8 screws. Secure
screws with an allen wrench. Conceal all exposed
screws on back panel with large covers. Conceal all
remaining holes at the back of the unit with small
covers. Repeat steps 1-4 for the left side media stand.
4 A) Fit top and bottom left side panels onto
assembled unit. Secure all remaining cams.
B) Conceal all exposed cams with large covers.
6 With the assistance of another adult, carefully fit
assembled left and right side media stands with
center component (fully assembled) as shown.
Assembly is now complete.
left side
media stand
right side
media stand
center component
(fully assembled)
top left
side panel
bottom left
side panel
COMPONENT ASSEMBLY
NOTE: Media center can be 36”-55”
wide based on customer preference.
A
B