Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China r10 Page 1 of 3

Thank you for purchasing the Puzzle Entertainment

Center. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

PUZZLE ENTERTAINMENT CENTER

Missing hardware? Please call 800.606.6387

for replacements.

32 - cam

screws

2 - side panels

(1 right, 1 left for right

tower assembly)

2 - bottom

side panels

(1 right, 1 left)

2 - top

side panels

(1 right, 1 left)

4 - small

panels

4 - large

panels

2 - back panels

32 - cams

72 - wood

dowels

32 - large

covers

16 - screws

2 - bottom

stretchers

16 - small

covers

Phillips head screwdriver

allen wrench (included)

Customer Service 800.967.6696 | www.crateandbarrel.com

PAGE 1
PUZZLE ENTERTAINMENT CENTER HARDWARE Thank you for purchasing the Puzzle Entertainment Center. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 32 - cam screws 32 - cams 72 - wood dowels 32 - large covers 16 - small covers 16 - screws Missing hardware? Please call 800.606.
PAGE 2
PUZZLE ENTERTAINMENT CENTER RIGHT TOWER ASSEMBLY A right side panel B top left side panel C bottom left side panel 1 A. Place right side panel onto clean, padded surface. Insert 18 wood dowels and 8 cam screws into left side panel as shown. Secure, but do not over tighten the screws with a phillips head screwdriver. B. Insert 8 wood dowels and 4 cam screws into top left side panel as shown. C. Insert 10 wood dowels and 4 cam screws into bottom left side panel as shown.
PAGE 3
PUZZLE ENTERTAINMENT CENTER bottom left side panel top left side panel A B 4 A) Fit top and bottom left side panels onto assembled unit. Secure all remaining cams. B) Conceal all exposed cams with large covers. COMPONENT ASSEMBLY NOTE: Media center can be 36”-55” wide based on customer preference. 5 Carefully position unit upright as shown. Attach back panel onto assembled unit with 8 screws. Secure screws with an allen wrench. Conceal all exposed screws on back panel with large covers.