Assembly Instruction

PUZZLE DESK - FILE COMPONENT
Page 4 of 6
Made in China - r14
8 Fit file bottom panel onto the underside of the
assembly as shown, aligning the dowels and cam screws
with corresponding holes. Secure 10 cams with a phillips
head screwdriver.
9 Attach 1 drawer glide to the file left side panel and 1
drawer glide to the file interior panel with 2 small wood
screws per glide. Make sure the final installed
position of the glide is approximately 3/4” from the
front edge of each panel as illustrated.
A
B
10 A. Attach right and left small drawer sides to small
drawer back with 4 bolts as shown. Secure, but do not
over tighten with the small allen wrench.
B. Slide small drawer bottom into slot at bottom of
back and side panels.
A
B
Aprox
3/4”
11 A. Fit small inner drawer front onto assembly as
shown. Attach with 4 bolts from the sides and secure with
the small allen wrench.
B. Align holes small drawer front panel with holes on
assembly. Insert 2 machine screws through drawer fronts
and into 1 drawer pull. Secure with a phillips head
screwdriver.
Customer Service 800.967.6696 | www.crateandbarrel.com