Assembly Instruction

PUZZLE DESK - FILE COMPONENT
Page 3 of 6
Made in China - r14
4 A. Insert 6 wood dowels and 5 cams into the file back
panel as shown. Make sure arrows on each cam point
towards nearest edge with holes.
B. Turn file back panel over and fit into corresponding
holes in file top panel as shown. Secure cam by turning
clockwise with a phillips head screwdriver.
6 Fit cam screws of file right side panel into
corresponding holes on the assembled unit. Secure 3
cams with a phillips head screwdriver.
5 Fit cam screws of file left side panel into corresponding
holes in the assembly. Lock all 9 cams by turning clockwise
with a phillips head screwdriver.
7 A. Insert 2 cams into the foot stretcher and 1 cam
screw into each foot panel. Make sure unfinished edges of
each panel faces “up” as shown. Fit cam screws of foot
panels into ends of foot stretcher and secure each cam with
a phillips head screwdriver.
B. Insert 4 cam screws into underside of file bottom panel
as shown. Insert 4 cams and 4 wood dowels into the foot
panels. Fit cam screws of bottom panel into holes on foot
panels and secure each cam with a screwdriver.
A
B
A
B
Unfinished edges
face “up”
Customer Service 800.967.6696 | www.crateandbarrel.com