Assembly Instruction

PUZZLE DESK - DESK COMPONENT
Pa
g
e
2
o
f
3
Made in China - r12
1 A. Insert 6 cam screws and 4 wood dowels in the
desk side panel. Secure, but do not over tighten cam
screws with a phillips head screwdriver.
B. Insert 3 cam screws in the desk short side panel and
secure with a screwdriver.
C. Insert 7 cam screws in the desk top panel and secure
with a screwdriver.
A
B
C
Make sure
arrow on each cam
points towards edge
B
A
C
D
Desk Side
Panel
Desk Short
Side Panel
Desk Top
Panel
Desk Back
Panel
Desk Bottom
Panel
Desk Side
Panel
Desk Short
Side Panel
3 A. Fit desk short side panel onto desk bottom
panel as shown, aligning cam screws with corresponding
holes.
B. Secure panels by turning each cam clockwise with a
phillips head screwdriver until each cam securely
engages each cam screw.
4 Fit panel assembly onto cam screws of desk side panel
as shown. Secure panels by turning each cam clockwise
with a phillips head screwdriver until each cam securely
engages each cam screw.
2 A. Insert 2 wood dowels and 4 cams into the desk back
panel. Make sure the arrow on each cam points towards the
nearest edge.
B. Insert 6 cams into the desk bottom panel.
C. Insert 3 cams and 2 wood dowels into the desk side
panel.
D. Insert 3 cams and 4 wood dowels into the desk short
side panel.
Note: This is the front of the
assembly. Make sure pre-installed
drawer pulls out in this direction.
Customer Service 800.967.6696 | www.crateandbarrel.com