Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE BOOKCASE - LEFT FACING
Made in China 2004
Page 3 of 4
9 Insert 4 levellers into the threaded holes on the under-
side of the assembly.
8 With the assistance of another adult, place the bookcase
assembly face down. Using the included allen wrench,
fasten 12 wood screws through the back panel into the
corresponding holes on the back of the shelves as indicated.
NOTE: There will be 1 unused hole on each shelf.
6 A. Fasten 4 cam screws to the inner holes of the
2 shelf end panels.
B. Fasten 4 cam screws to the inner holes of the
base end panel.
7 Fit shelf and base end panels into positon, aligning
corresponding holes of cam screws and dowels. Secure
all 12 cams by turning each clockwise 90 degrees.
A
B
x 2
x 1
Shelf
End Panel
Base End
Panel
Shelf
End Panel
Base
End Panel
Shelf
End Panel
These holes
will not be used