Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
PUZZLE SET OF 2 BOOKCASE CONNECTORS
Made in China 2004
Page 2 of 3
5 Secure the assembly by turning each cam 90 degrees
clockwise with a screwdriver. Turn the cam until the arrow
points away from the edge of the panel.
4 Place other short panel into postion, aligning dowels,
cam screws and back panel with corresponding holes and
slot.
2 A. Insert 4 cams into each long panel, making sure the
arrow on the cam points out towards the edge with the holes.
B. Insert 4 wood dowels into the outer holes of each
long panel.
3 A. Align dowels of the 2 long panels with holes in 1
short panel and fit into position. Make sure the slot of each
panel is at the rear of the assembly.
B. Slide back panel into the slot at the rear of the assembly.
A
B
x 8
Cam in
unlocked
position
Cam in
locked
position
A
B
Arrow points out,
towards edge
with holes
x 2