Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PUZZLE SET OF 2 BOOKCASE CONNECTORS

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in China 2004

Page 1 of 3

Thank you for purchasing the Puzzle Set of 2 Bookcase

Connectors. This page lists all the contents included in

the box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

NOTE: These units are designed to be used in conjunction

with the Puzzle Bookcase. Do not use these as stand-alone

storage units.

16 - cams

4 - short panels

(2 left, 2 right)

4 - long panels

(2 top, 2 bottom)

16 - cam screws

24 - wood dowels

8 - felt pads

2 - back panels

1 Place 2 short panels on the floor with the holes

facing up. Insert 4 cam screws per panel into the inner

holes and secure with a phillips head screwdriver.

IMPORTANT NOTE:

You will be building 2 identical units. The following

instructions are for building a single unit, so these

instructions will need to be repeated for assembly

of the 2nd unit.

Missing hardware? Please call 800.606.6387 for

replacements.

PAGE 1
PUZZLE SET OF 2 BOOKCASE CONNECTORS HARDWARE 16 - cams Thank you for purchasing the Puzzle Set of 2 Bookcase Connectors. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. NOTE: These units are designed to be used in conjunction with the Puzzle Bookcase.
PAGE 2
PUZZLE SET OF 2 BOOKCASE CONNECTORS x2 Arrow points out, towards edge with holes A B 2 A. Insert 4 cams into each long panel, making sure the arrow on the cam points out towards the edge with the holes. B. Insert 4 wood dowels into the outer holes of each long panel. A B 3 A. Align dowels of the 2 long panels with holes in 1 short panel and fit into position. Make sure the slot of each panel is at the rear of the assembly. B. Slide back panel into the slot at the rear of the assembly.
PAGE 3
PUZZLE SET OF 2 BOOKCASE CONNECTORS CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish. 6 Remove adhesive backer from the 4 felt pads and attach to the long panels, covering the cam holes. Assembly is now complete. CONFIGURATION SUGGESTIONS Shown using 1 right facing bookcase, 1 left facing bookcase (sold seperately) and 1 set of 2 connector units. Page 3 of 3 Made in China 2004 Customer Service 800-967-6696 | http://www.