Assembly Instruction

PULLMAN BENCH

1 A) Carefully place seat frame face down on

padded surface. Remove velcro seat cover and set

aside.

B) Fit 4 legs into corners of seat frame as shown,

aligning corresponding holes in legs and seat

frame.

allen wrench (included)

Made in Vietnam r02 Page 1 of 2

Thank you for purchasing the Pullman Bench. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

8 - flat

washers

8 - spring

washers

8 - bolts

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - seat

frame

(seat cover pre-attached)

4 - legs

PAGE 1
PULLMAN BENCH HARDWARE 8 - bolts 8 - spring washers 8 - flat washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Pullman Bench. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PULLMAN BENCH 2 Secure legs with 2 bolts, 2 spring washers, and 2 flat washers per leg. Fully tighten bolts with an Allen wrench. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 3 Re-attach velcro of seat cover with corresponding velcro of seat frame. Carefully position unit upright. Assembly is now complete. Made in Vietnam r02 Customer Service 800.967.6696 | www.