Assembly Instruction

ROLL OUT DESK
Made in China - r03 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
6 A) Insert 5 wood dowels into keyboard tray leg
frame as shown.
B) Place keyboard tray onto a clean, padded surface
as shown. Fit wood dowels of keyboard tray leg
frame into corresponding holes of keyboard tray.
Secure keyboard tray with 4 bolts, 4 spring washers
and 4 flat washers using an allen wrench.
C) Attach keyboard crossbar to keyboard tray with 4
screws as shown. Secure, but do not over tighten the
screws, using a phillips head screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
keyboard tray
leg frame
B
A
keyboard tray
B
7 With the assistance of another adult, position
keyboard tray assembly upright. Fully extend glides of
desktop assembly. Fit glides of keyboard tray assem-
bly into corresponding glides of desktop assembly as
shown.
Assembly is now complete.
keyboard tray
assembly
desktop
assembly
NOTE: Do not over
tighten the screws
keyboard
crossbar
C
C