Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Pull Out Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r03 Page 1 of 3

Thank you for purchasing the Roll Out Desk. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ROLL OUT DESK

Missing hardware? Please call

800.606.6387 for replacements.

1 - desktop

13 - bolts

1 - keyboard tray

2 - side frames

(1 left, 1 right)

1 - back

crossbar

1 - back

panel

1 - keyboard tray

leg frame

1 - front

crossbar

Customer Service 800.967.6696 | Latest instructions avaliable at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

ASSEMBLY

back

crossbar

13 - flat

washers

13 - spring

washers

4 - cams

19 - wood

dowels

4 - cam

screws

phillips head screwdriver

allen wrench (included)

front

crossbar

1 A) Insert 2 cams into back crossbar and front cross-

bar as shown. Make sure arrows on each cam point

toward nearest edge with holes.

B) Insert 4 wood dowels into desktop as shown.

NOTE: Make sure arrows

on each cam point toward

nearest edge with holes

desktop

4 - screws

1 - keyboard

crossbar

Summary of content (3 pages)

PAGE 1
ROLL OUT DESK HARDWARE 13 - flat washers 4 - cams 13 - spring washers 4 - screws 19 - wood dowels 4 - cam screws 13 - bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED allen wrench (included) Thank you for purchasing the Roll Out Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ROLL OUT DESK front crossbar NOTE: Do not over tighten the cam screws B back panel B back crossbar A A NOTE: Do not over tighten the bolts left side frame left and right side frames 2 Insert 2 cam screws and 5 wood dowels into left and right side frames as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. 3 A) Fit wood dowels of left side frame into corresponding holes of front and back crossbar.
PAGE 3
ROLL OUT DESK 6 A) Insert 5 wood dowels into keyboard tray leg frame as shown. B) Place keyboard tray onto a clean, padded surface as shown. Fit wood dowels of keyboard tray leg frame into corresponding holes of keyboard tray. Secure keyboard tray with 4 bolts, 4 spring washers and 4 flat washers using an allen wrench. C) Attach keyboard crossbar to keyboard tray with 4 screws as shown. Secure, but do not over tighten the screws, using a phillips head screwdriver.