Assembly Instruction

COMPONENTS
WALL MOUNTING HARDWARE
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
SAFETY WALL MOUNTING INSTRUCTIONS:
NOTE:
If you are unsure about your wall type
or what mounting method you should
use, consult a qualified professional
or your local hardware store.
C
wall
bracket
plastic
anchor
screw
wall
strap
D
B
For added safety and stability, it is recommended
that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, dry wall,
concrete, etc.). Mount to wood studs whenever
possible.
A) Determine final location of final unit. Mark
position on wall.
B) Drill a hole in the wall stud. If the wall stud is
not available, drill a hole in the wall that is slightly
smaller in diameter than the anchor. Gently tap
the plastic anchor until the flange of the anchor is
flush with the wall.
C) Attach wall brackets to the wall by inserting 1
screw through each bracket and into each plastic
anchor in the wall, secure with a screwdriver.
D) Lace one end of the wall straps through each
bracket and around back upright of assembled
unit, and into the other end of the strap.
E) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
WALL
Made in Taiwan - r01 Page 1 of 1
Thank you for purchasing the Pop Up Folding Bookcase
4-Shelf. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
POP UP FOLDING BOOKCASE 4-SHELF
1 - bookcase
assembly
2 - screws2 - plastic
anchors
2 - wall
straps
2 - wall
brackets
Missing hardware?
Please call 800.606.6387 for replacements.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com