Assembly Instruction

3 With the assistance of another adult, position unit upright.
Fully extend drawer glides from desktop assembly. Fit
drawer glides of each drawer assembly into corresponding
drawer glides of desktop assembly. Push each drawer
forward and listen for a click to ensure that assembly is
secure.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer. It is recommended
to use coasters to protect surface from heat
and water
POCKET 2 DRAWER DESK
Made in China - r02 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 A) With the assistance of another adult, place desktop
assembly upside down onto a clean, padded surface. Fit
right leg frame into desktop assembly. Secure right leg
frame to desktop assembly with 2 flat washers, 2 spring
washers and 2 large bolts as shown, using an allen
wrench. Do not over tighten the bolts.
B) Secure right leg frame to desktop assembly with 2 flat
washers, 2 spring washers and 2 small bolts, using an
allen wrench.
C) Repeat steps A-B for left leg frame.
NOTE: Do not over
tighten the bolts
desktop
assembly
right
leg frame
drawer
assembly
left
leg frame
drawer
assembly
A
B
C
A
B