Assembly Instruction

Made in China - r02 Page 1 of 2

Thank you for purchasing the Pocket 2 Drawer Desk.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

POCKET 2 DRAWER DESK

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

allen wrench (included)

4 - large

bolts

COMPONENTS

Missing hardware?

Please call 800.606.6387 for replacements.

4 - small

bolts

1 - desktop

assembly

2 - leg frames

(1 left, 1 right)

8 - flat

washers

8 - spring

washers

desktop assembly

drawer

left drawer

glide

right drawer

glide

drawer

1 Place desktop assembly onto a clean, padded

surface. Fully extend each drawer from desktop assem-

bly. Locate plastic tabs on left and right drawer glides.

With even pressure, simutaneously lift the left tab (A)

and press the right tab (B) to release drawer assembly

from assembled unit.

PAGE 1
POCKET 2 DRAWER DESK HARDWARE 4 - small bolts 4 - large bolts 8 - spring washers 8 - flat washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Pocket 2 Drawer Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
POCKET 2 DRAWER DESK 2 A) With the assistance of another adult, place desktop assembly upside down onto a clean, padded surface. Fit right leg frame into desktop assembly. Secure right leg frame to desktop assembly with 2 flat washers, 2 spring washers and 2 large bolts as shown, using an allen wrench. Do not over tighten the bolts. B) Secure right leg frame to desktop assembly with 2 flat washers, 2 spring washers and 2 small bolts, using an allen wrench. C) Repeat steps A-B for left leg frame.