Assembly Instruction

3 With the assistance of another adult, position unit upright.

Fully extend drawer glides from desktop assembly. Fit

drawer glides of drawer assembly into corresponding drawer

glides of desktop assembly. Push drawer forward and listen

for a click to ensure that assembly is secure.

Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.

Do not use abrasive cleaners. Do not use

furniture wax or polish as the wood is finished

with a protective clear lacquer. It is recommended

to use coasters to protect surface from heat

and water

POCKET 1 DRAWER DESK

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 A) With the assistance of another adult, place desktop

assembly upside down onto a clean, padded surface. Fit

right leg frame into desktop assembly. Secure right leg

frame to desktop assembly with 2 flat washers, 2 spring

washers and 2 large bolts as shown, using an allen

wrench. Do not over tighten the bolts.

B) Secure right leg frame to desktop assembly with 2 flat

washers, 2 spring washers and 2 small bolts, using an

allen wrench.

C) Repeat steps A-B for left leg frame.

NOTE: Do not over

tighten the bolts

desktop

assembly

right

leg frame

drawer

assembly

left

leg frame