Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

4 With the assistance of another adult, lift assembled

frame into an upright position. Remove adhesive backer

and attach 4 sponge bumpons on the top shelf and 4

rubber bumpons on each lower shelf support.

PLATEAU MEDIA TOWER

Page 2 of 2

Made in China

2 A. Attach remaining rear frame to assembly with 2 allen

screws using method outlined in Step 1.

B. Secure bottom shelf with 2 short machine screws.

Fully tighten with a phillips head screwdriver.

3 Insert 1 plastic tube cap onto bottom of each leg. Secure

into place by gently tapping with a hammer.

5 Install glass top and shelves as shown, making sure

each shelf is solidly supported by the bumpons.

Assembly is now complete.

CARE & CLEANING

Clean as needed with a damp cloth.