Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
TOOLS REQUIRED
Allen Wrench (included)
Phillips head screwdriver
Hammer
1 A. Lay front frame face down with the tube fittings
facing up. Insert 6 shelf pins into threaded holes of front frame
and tighten with the allen wrench.
B. Slide 1 rear frame over tube fitting and fit shelf pins and small
brackets into the smaller tubes of rear frame.
C. Secure frames with 2 allen head screws using allen wrench.
4 - allen
head screws
16 - rubber bumpons 4 - sponge bumpons
Thank you for purchasing the Plateau Media Tower.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
COMPONENTS
1 - front frame
2 - rear frames
4 - glass shelves
1 - glass top
6 - shelf pins
PLATEAU MEDIA TOWER
Page 1 of 2 Made in China
4 - tube caps
A
B
2 - short
machine screws
C
Missing hardware? Please call 800.606.6387
for replacements.